Skip to main content

Installing Blue Tooth Device

Introduction

This sections covers the installation of the blue tooth devices used to sendtransmit data to The Kozy Mobile App.

Installation

Meters are typically connected to printers using a DB-25 cable, but with the use of a lapad cable, the meter can be connected to both a printer and the Blue Tooth Adaptor used to transmit data to the Kozy Mobile App. Installation is simple and should only take a short time to install on each truck. In the case of a meter needing more configurations, an in depth look will be on the ... page. The Lapad cable itself is essentially a y cable with two cables being a female and male DB-25 Cable with the other wire used to connect to the Blue Tooth Adaptor. The connection can be made using the wire adaptor that is provided along with the Blue Tooth Adaptor.

  • Setting up the Meter

    1. Remove the DB-25 Cable from the Printer
    2. Using the Lapad Cable, connect the female end of the Y cable into the male end of the DB-25 cable coming out of the Meter
    3. Next, connect the lapad cable to the printer using the male end that looks like the DB-25 Cable
    4. Now connect the remaining cable into the cable adaptor that came with the Blue Tooth Adaptor

  • Setting up The Blue Tooth Adaptor

    1. Using the provided cable, connect the end that looks like an ethernet cable to the end of the Blue Tooth Adaptor that looks like an ethernet port (WARNING! DO PLUG AN ETHERNET CABLE TO ADAPTOR OR ANYTHING ELSE, JUST THE PROVIDED CABLE)
    2. Next, plug in the Blue Tooth Adaptor using a USB-C cable to provide power
    3. Using the other end of the cable proved, connect the cable to the Lapad cable mentioned above

Once all set, The Meter, Printer and Blue Tooth Device should all be connected and ready for use with the Kozy Mobile App

Back to top