Driver Workflow

Driver Workflow and Delivery Exceptions

The mobile workflow connects the assigned load back to office review. Exact options depend on the driver's permissions, the truck, the meter connection, and company procedure.

Typical Driver Flow

  1. Open the assigned fuel load and review the listed stops. Routes are saved on the device, and the date picker shows a calendar with a dot on each day that has a route.
  2. Complete the signed pre-trip inspection when configured: mark each item OK, defect, or N/A, sign, and set the safe-to-drive time.
  3. Record the fuel pickup (or transfer), including the fuel, gallons, and destination container or compartment. On a multi-compartment truck, choose the source compartment or leave it on Automatic.
  4. Open the first delivery stop and confirm the location and delivery notes. The app warns when you start more than about 0.8 mile from the delivery address.
  5. Complete the delivery through the connected meter when automated (Start), or tap Gallons to enter the delivered amount when the truck has no meter or manual entry is allowed.
  6. Add any extras for the stop, such as a surcharge, tank additive, or equipment restart. Each extra is its own line on the ticket and invoice.
  7. Stop (metered) or complete (manual) the delivery in the Complete Delivery sheet, which shows the amount due and driver feedback, then continue to the next stop.
  8. Record an authorized transfer when fuel is moved between approved trucks, containers, or compartments.
  9. Complete the signed post-trip inspection at the end of the route.

Meters, Tickets, and Drive Mode

When a Stop Cannot Be Completed

  1. Skip or reorder the stop when conditions require it and company procedure permits.
  2. Record a clear note describing the condition, such as an unsafe or inaccessible driveway, road obstruction, blocked access, or another delivery issue.
  3. Attach a photo when the field workflow supports it and documentation is appropriate.
  4. Use Mark Leftover and pick a reason, or Mark Short Delivery with the gallons short, so the office can see that the stop still needs attention.
  5. Return to the stop or reschedule it according to the company's dispatcher and driver procedure.

Do not let an exception disappear: A skipped stop is not the same as a completed delivery. The driver should document what happened, and the office should confirm whether the stop will be retried, moved, or rescheduled.

Office Handoff

When the driver completes the load, the office reviews completion status, delivered quantities, ticket information, exceptions, pickups, transfers, and inspections before creating or posting invoices.


Revision #2
Created 2026-09-09 13:36:17 UTC by Kozy Operations
Updated 2026-11-03 22:19:39 UTC by Kozy Operations