Routing / Fuel Department

Pricings Basics / Fuel Assistance

Pricing begins with the selected fuel and pickup terminal. Review the current effective price before building or dispatching the day's routes. A new price entry takes over until the next entry occurs.

TERMWHAT IT MEANS
TerminalThe in-house or third-party location where a truck picks up fuel. Each terminal can carry its own fuel pricing.
Rack priceThe fuel cost charged to the company at the selected terminal.
Base costThe company's per-gallon cost of doing business, such as driver and truck costs, as configured by the company.
Margin constraintsConfigured minimum and maximum guardrails used to protect the intended margin.
Special marginA commercial, wholesale, or other special margin. When used, it replaces the base-cost component rather than being added on top of base cost.
Usage modifierA company-configured adjustment based on factors such as delivered gallons or tank size, including small-delivery fees or volume discounts.

Update the Daily Rack Price

  1. Open Fuel, then Prices.
  2. Select the terminal you are updating. A child terminal that posts its own prices has its own tab.
  3. Enter the day's rack price for each fuel at that terminal.
  4. Save the entry. The new price takes effect and stays in place until the next price entry.
  5. Repeat for each terminal your trucks pick up from that day.

Daily task: Once KozyOps staff set up your margins, base cost, and pricing rules during implementation, the rack price is the only value you need to update each day.

Terminals and Price Charts

Fuel Assistance Pricing

Fuel Contracts, Budgets, and Taxes

Configuration note: Exact rates, margins, modifiers, effective dates, tax order, and assistance programs are company configured. Only authorized users should change pricing or Admin settings.

Create a Route and Stage the Load

A route identifies the driver and truck. A staged load organizes the pickup and planned stops before the load is assigned to that route.

A. Create the Route

  1. Open Fuel, then Routing.
  2. Select the fuel type being routed.
  3. Set the routing date for the work being planned.
  4. In Routes, select the plus action to add a route.
  5. Select the appropriate driver.
  6. Choose the truck assigned to the route. The truck list shows only trucks that can carry the selected fuel.
  7. Save or confirm the route so it is available for load assignment.

B. Create or Select a Staged Load

  1. Move to Staging.
  2. Select the plus action to create a load.
  3. Choose the terminal where the load will be picked up. Terminal selection connects the load to the applicable terminal pricing.
  4. (Optional) Enter the load number for the driver's sequence of pickups that day.
  5. Assign the Route to the appropriate Driver/Truck.

Multiple pickups: When a truck must refill during the day, the route may use more than one load. Each load can identify its pickup terminal, which matters when terminal pricing differs.

Add Stops, Assign, and Finalize the Route

Add Delivery Stops

  1. Add an individual delivery by selecting the appropriate customer marker and adding it to the active load.
  2. To select a geographic group, choose the lasso tool and draw a polygon around the intended stops. The lasso's edit button changes the dot size and color on a busy map.
  3. Finish the polygon, review the number of customers selected, and confirm the selection.
  4. Review customer delivery requests and add the appropriate requests to the active load.
  5. Check which requests are already routed and which remain unrouted so no request is assumed complete before assignment.
  6. Review the expected gallons against the truck's available capacity and planned pickup sequence.

Selecting a stop on the map shows the tank monitor's status in plain words (Reporting, No Signal, Not Installed), a fill-level bar, the customer's name and address, and router, office, system, and delivery-request notes. The map opens on the degree day of the busiest zone on screen.

Reading the Routing Map

Each stop on the routing map is a pin. The pin's color shows the tank level, its shape shows why the stop is on the map, and its rim shows timing. Tank level comes from a degree-day estimate, or a tank monitor reading from the last 3 days. Open the Map Legend on the routing map to see this key on screen.

Tank level (color)

What it means

Early Delivery

Early Delivery

The tank can take a delivery, but it is early.

Ready for Delivery

Ready for Delivery

The tank is ready for its delivery.

Past Optimum Delivery

Past Optimum Delivery

The tank is past its best delivery point.

Runout Within 4 Days

Runout Within 4 Days

The tank is projected to run out within 4 days.

Runout Imminent

Runout Imminent

The tank is projected to run out very soon.

No Level Estimate

No Level Estimate

No usage rate and no fresh monitor reading.

Shape

Why it is on the map

Usage Forecast

Usage Forecast

Degree days or the tank monitor say it is time.

Scheduled Delivery

Scheduled Delivery

From a calendar schedule.

Requested Delivery

Requested Delivery

A customer or office request.

Scheduled Route

Scheduled Route

On a route that repeats with the same stops.

Fleet

Fleet

Trucks or equipment fueled where they are parked.

Stop Number

Stop Number

The stop's order on the selected load.

Rim

Timing

Due

Due

Inside its promised window.

Late

Late

Past its promised date. The tab counts the days late.

Route status replaces the tank color on the pin. A late rim still shows.

Route status

What it means

Routed for Date

Routed for Date

On a route for the selected date.

On Future Route

On Future Route

On a route for a later date.

Delivered

Delivered

The delivery is complete.

Never Received Full Delivery

Never Received Full Delivery

No full delivery is on record for this tank.

New Customer

New Customer

A new customer account.

Assign and Review

  1. Assign the staged load to the correct route.
  2. Use Optimize or Recalculate Path to generate a suggested stop order.
  3. Review the suggested route. Drag and drop stops when known road conditions, customer timing, or operating needs require a different order.
  4. Confirm the fuel type, date, driver, truck, terminal, load number, stops, expected gallons, and pickup plan before moving to delivery pricing.
ROUTING TERMHOW TO RECOGNIZE IT
Staged loadA planned pickup and group of stops still being prepared. It is not yet the driver's assigned route.
Assigned routeA route tied to the selected driver and truck, with a staged load assigned for field work.
Routed requestA customer delivery request already placed on a route; the routing screen indicates its routed status.
Unrouted requestA submitted request that has not yet been added to a driver's load or route.
Scheduled routeA route template that repeats the same stops on a set cadence.

Generate Routes

Scheduled Repeating Routes

  1. Build a good route, then select Repeat this route on the routing board. The editor opens filled in from that route.
  2. Set the cadence: days of the week, every how many weeks, a start date, an optional end date, and any dates to skip. Review the preview of the next runs.
  3. Save the template. Templates can be paused, resumed, deleted, and restored from the Scheduled routes screen.
  4. When a scheduled run is missing stops, the board shows a count beside the route. Select Add missing and read the list of stops it could not place and why, such as no open delivery, a hold, or a different fuel.

Delivery Requests

Pricing Deliveries

Review and Price Deliveries

Pricing review normally happens after routing and before the driver leaves. This places the expected price information on the delivery ticket and gives the office a final chance to catch account or quantity issues.

  1. Open Fuel, then Deliveries.
  2. Set the correct delivery date or date range.
  3. Select the applicable fuel type, and the brand when the company runs more than one.
  4. Filter by route when it helps isolate the deliveries being reviewed.
  5. Select all deliveries for the intended group, or select individual deliveries when only part of the list should be priced.
  6. Review customer pricing notes and delivery notes before applying prices.
  7. Use Price Selected for the selected records.
  8. Confirm that the intended deliveries now show the expected pricing status before dispatch.

Reading the Deliveries Board

What to Review on Each Delivery

QUANTITYREVIEW QUESTION
Expected gallonsDoes the planned amount make sense for the customer and route?
Delivered gallonsAfter completion, does the entered or metered amount match the delivery record and ticket?
Tank capacityIf delivered gallons exceed capacity, is the tank record wrong or was the delivery amount entered incorrectly?

Printable records: Use Cover Sheets for available route cover sheets and Print Tickets when the company's physical ticket process requires a printable PDF. Confirm the date, route, and deliveries first. Cover sheets print the driver's signed pre-trip and post-trip inspections.

Card Preauthorization Holds

  1. Select the card button on a ticket, or select tickets and choose Preauthorize Selected.
  2. Choose the hold amount: Full tank, Requested (or Estimated when there is no customer request), Requested plus a dollar amount that starts at $50, or an exact amount on one ticket.
  3. Submit. A held ticket's card button turns green and shows the amount.
  4. To end a hold, open the ticket and choose Release or Collect as account credit.

Tell Customers Their Delivery Is Routed

Tank Levels and Adjustments

Driver Workflow

Driver Workflow and Delivery Exceptions

The mobile workflow connects the assigned load back to office review. Exact options depend on the driver's permissions, the truck, the meter connection, and company procedure.

Typical Driver Flow

  1. Open the assigned fuel load and review the listed stops. Routes are saved on the device, and the date picker shows a calendar with a dot on each day that has a route.
  2. Complete the signed pre-trip inspection when configured: mark each item OK, defect, or N/A, sign, and set the safe-to-drive time.
  3. Record the fuel pickup (or transfer), including the fuel, gallons, and destination container or compartment. On a multi-compartment truck, choose the source compartment or leave it on Automatic.
  4. Open the first delivery stop and confirm the location and delivery notes. The app warns when you start more than about 0.8 mile from the delivery address.
  5. Complete the delivery through the connected meter when automated (Start), or tap Gallons to enter the delivered amount when the truck has no meter or manual entry is allowed.
  6. Add any extras for the stop, such as a surcharge, tank additive, or equipment restart. Each extra is its own line on the ticket and invoice.
  7. Stop (metered) or complete (manual) the delivery in the Complete Delivery sheet, which shows the amount due and driver feedback, then continue to the next stop.
  8. Record an authorized transfer when fuel is moved between approved trucks, containers, or compartments.
  9. Complete the signed post-trip inspection at the end of the route.

Meters, Tickets, and Drive Mode

When a Stop Cannot Be Completed

  1. Skip or reorder the stop when conditions require it and company procedure permits.
  2. Record a clear note describing the condition, such as an unsafe or inaccessible driveway, road obstruction, blocked access, or another delivery issue.
  3. Attach a photo when the field workflow supports it and documentation is appropriate.
  4. Use Mark Leftover and pick a reason, or Mark Short Delivery with the gallons short, so the office can see that the stop still needs attention.
  5. Return to the stop or reschedule it according to the company's dispatcher and driver procedure.

Do not let an exception disappear: A skipped stop is not the same as a completed delivery. The driver should document what happened, and the office should confirm whether the stop will be retried, moved, or rescheduled.

Office Handoff

When the driver completes the load, the office reviews completion status, delivered quantities, ticket information, exceptions, pickups, transfers, and inspections before creating or posting invoices.

Posting Fuel Invoices

Create and Post Fuel Invoices

  1. Return to Fuel, then Deliveries, and open the completed delivery date or range.
  2. Filter by fuel type, brand, and/or route when helpful.
  3. Confirm delivered gallons, the related ticket information, and any exception notes. Correct supported data issues before billing.
  4. Select the completed deliveries and Mark as Checked. If invoice creation fails, use Retry invoice; undoing a check-in is in the More menu.
  5. Open Billing, then Invoices.
  6. Filter by the correct date, fuel, and the fuel-sales invoice subtype configured by your company.
  7. Open an individual invoice when detailed review is needed; otherwise select the verified group for bulk processing.
  8. Use Post Selected to post the approved group. Posting recalculates each invoice first and refuses any invoice dated after today. Emails send automatically; you only need to print the ones you mail.
  9. Confirm the invoices and payments appear as expected after posting.

Automatic fuel payments: When an account is configured for automatic fuel payment, its stored payment method may be charged as the fuel invoice is posted. Existing account credit may reduce the amount charged. Release or collect any card hold left from preauthorization. Verify the company's payment configuration and confirm the result after posting.

Fuel Inventory Overview

Open Fuel, then Inventory, to review company-configured fuel inventory. The dashboard can summarize fuel quantities, vehicles, terminals, low-stock information, and scheduled activity.

Quick Reference

STAGEDAILY CHECK
1. PriceEnter today's rack price for each terminal under Fuel, Prices. Confirm fuel, terminal, current effective price, margins, and applicable customer indicators.
2. RouteSet date and fuel; create the route or run Generate Routes; assign the correct driver and truck.
3. StageSelect terminal and load number; add stops and requests; use Add missing on scheduled routes; review expected gallons.
4. FinalizeAssign the load; use Optimize or Recalculate Path; manually reorder and perform final dispatch review.
5. PreparePrice deliveries, place card holds, and send routed notices.
6. DeliverComplete inspections, pickups, stops, extras, transfers, and exception documentation.
7. VerifyCompare delivered gallons, tickets, tank capacity, notes, and completion status. Place every Pending or Leftover meter sale.
8. BillCheck in; create invoices; filter the correct subtype; review, email, post, and verify payment results.
9. ReconcileReview truck fill levels, containers, transfers, sinks, history, and inventory reports.

Common Mistakes to Avoid

Final check: After every major action (assign, price, complete, create, post, or transfer), open the next screen in the workflow and confirm the record moved forward correctly.